![]() ![]() Add a custom property section that sets the bPropertyName field to a Unicode string, "IdleUsbSelectiveSuspendPolicy" and wPropertyNameLength to 62 bytes. ![]() Write an INF that references the install INF and add the registry entry in the HW.AddReg section.Äescribe the registry entry in an extended properties OS feature descriptor. That entry can be added in one of two ways: "0x00000000": Enters selective suspend only when there are no open handles to the device. "0x00000001": Enters selective suspend when idle, that is, when there are no active data transfers to or from the device. To configure power management features of Usbser.sys, you can set IdleUsbSelectiveSuspendPolicy to: The feature is disabled by default and can be enabled and configured by setting the IdleUsbSelectiveSuspendPolicy entry under this registry key: HKEY\_LOCAL\_MACHINE\\SYSTEM\\CurrentControlSet\\Enum\\USB\\\\\\Device ParametersWhen communication with the device resumes, the device can leave the suspend state and resume the working state. It allows the attached USB-to-serial device to enter a low power state when not in use, while the system remains in the S0 state. Starting in Windows 10, Usbser.sys supports USB Selective Suspend. For information about INF sections, see Overview of INF Files.Ĭonfigure selective suspend for Usbser.sys For examples, look through the INF files included with sample drivers and find devices similar to your device. If your device specifies class and subclass codes to 02, and you want to load another driver instead of Usbser.sys, you have to write an INF that specifies the hardware ID of the device and the driver to install. You might have to load your own driver or write an INF that references another in-box driver. If a suitable driver isn't found, the device might not have a driver loaded. The Plug and Play manager tries to find a driver. If your device specifies class code 02 but a subclass code value other than 02, Usbser.sys doesn't load automatically. For more information, see Class definitions for Communication Devices 1.2. With this approach, you aren't required to distribute INF files for your device because the system uses Usbser.inf. If you want to load Usbser.sys automatically, set the class code to 02 and subclass code to 02 in the Device Descriptor. The driver is loaded based on a compatible ID match similar to other USB device class drivers included in Windows. You don't need to write your own INF to reference the driver. If your device belongs to the communications and CDC control device class, Usbser.sys is loaded automatically. Starting in Windows 10, Usbser.inf was added to the %Systemroot%\INF directory, which loads Usbser.sys as the functional device object (FDO) in the device stack. For the list of USB device class driver included in Windows, see USB device class drivers included in Windows. If they are not installed automatically, contact the device manufacturer. Driver can auto-download via Windows Update (Windows 7, 8, 8.If you trying to install a USB device class driver included in Windows, you do not need to download the driver. Windows Vista, 7, 8, 8.1 Certified WHQL Driver Compatible with Windows 2000SP4 & Server2003 Installer version & Build date: 1.12.0 () (For PL2303 HXA, XA, HXD, EA, RA, SA, TA, TB versions) This is the Prolific website read on the driver I installed:Äownload File: PL2303_Prolific_DriverInstaller_v1.12.0.zip July for the ones from the download page) and so Windows prefers it over them. The problem is probably that the non-working driver is the newest (September 2021 vs. I had only one other entry, a "ser2pl.inf" version " 3.8.40.0".Äisconnect the device, and "pnputil /delete-driver oemXY.inf" with the INF file you located in the previous step.Ĭonnect the device again, and it should work, at least, it does for me. Then "pnputil /enum-drivers", and in the output look for Prolific drivers other than the ones from the previous step. It will add the two driver packages to the driver store and tell you what oemXY.inf files it has assigned to them. ![]() What I did is this:įirst install the downloaded driver by unpacking the zip file and "pnputil /add-driver *.inf /subdirs /install" (the /install is probably not necessary) from the extracted "Win11_DCHU" directory. Getting it installed is a bit tricky, it seems. There is a working driver at, a bit down the page listed as "DCHU (for PC Vendors)". ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |